Ding Yuan | Materials Science | Best Researcher Award

Prof. Ding Yuan | Materials Science | Best Researcher Award

Professor, at University of Shanghai for Science and Technology, China.

Dr. Ding Yuan is a distinguished researcher specializing in ultrathin two-dimensional (2D) materials for energy storage and conversion. She earned her Ph.D. from Griffith University in 2021 under the mentorship of Prof. Shanqing Zhang and Prof. Huijun Zhao. Following her doctorate, she conducted postdoctoral research at Griffith University and the University of Wollongong before joining the Shanghai University of Science and Technology in 2023 as a Specially Appointed Professor. Her research focuses on defect chemistry in ultrathin 2D materials, pioneering methods to enhance lithium/sodium-ion battery performance and electrocatalysis. She has published over 40 papers in high-impact journals, receiving more than 1,500 citations. Dr. Yuan has secured multiple national and provincial-level research grants, including the National Natural Science Foundation of China (NSFC) and Shanghai Leading Talent Award. Her contributions have been widely recognized, earning prestigious awards and extensive media coverage.

Professional Profile

🎓 Education

Dr. Ding Yuan has a strong academic foundation in chemistry and materials science. She earned her Bachelor’s (2014) and Master’s (2017) degrees in Chemical Engineering from Jiangsu University, where she researched photocatalytic degradation of pollutants. She pursued her Ph.D. (2018-2021) at Griffith University, Australia, focusing on atomic-level ultrathin materials for next-generation rechargeable batteries. Under the supervision of Prof. Shanqing Zhang and Prof. Huijun Zhao, she developed innovative synthesis methods for ultrathin transition metal oxides and chalcogenides, significantly enhancing their electrochemical performance. Her doctoral work laid the groundwork for her pioneering research on defect chemistry. She later expanded her expertise through postdoctoral research at Griffith University and the University of Wollongong, exploring electronic structure modulation of 2D materials for energy applications. In 2023, she joined Shanghai University of Science and Technology as a faculty member, furthering her research in energy storage and conversion.

💞 Experience

Dr. Ding Yuan’s career spans academia and research leadership. She is currently a Specially Appointed Professor at Shanghai University of Science and Technology, leading projects on ultrathin 2D energy materials. Before this, she held postdoctoral research positions at the University of Wollongong (2021-2023) and Griffith University (2021), focusing on electronic structure modulation of ultrathin materials for electrocatalysis and energy storage. Throughout her career, Dr. Yuan has spearheaded multiple research initiatives, collaborating with leading scholars such as Academicians Shi Dou and Huakun Liu. Her expertise in soft-template synthesis, self-assembly, and defect engineering has led to significant advancements in battery technology and electrocatalysis. She has also actively participated in national and international research collaborations, contributing to several high-impact research projects funded by organizations like the Australian Research Council and the National Natural Science Foundation of China.

🔎 Research Interests

Dr. Ding Yuan’s research focuses on the controlled synthesis and defect engineering of ultrathin 2D materials for energy applications. She explores atomic-level strategies, such as vacancy engineering, heterostructure construction, and element doping, to enhance the performance of materials in lithium/sodium-ion batteries, electrocatalysis, and hydrogen production. Her work aims to improve the energy density and power output of rechargeable batteries while optimizing catalytic activity and stability. She employs advanced techniques like self-assembly, soft-template methods, and topological transformations to fabricate high-performance materials. Dr. Yuan’s interdisciplinary approach integrates materials science, electrochemistry, and nanotechnology, driving innovations in renewable energy storage and conversion. Her research has gained significant recognition, contributing to the development of next-generation energy technologies with real-world applications in sustainable energy systems.

🏆 Awards

Dr. Ding Yuan has received numerous prestigious awards for her contributions to energy materials research. Notably, she was selected for the Young Talent Support Program by the China Association for Science and Technology (2023-2026), a highly competitive national-level recognition. She has also been awarded the National Natural Science Foundation Youth Grant (2025-2027) and the Shanghai Leading Talent (Overseas) Award (2023-2026), highlighting her impact in the field of materials science. Additionally, she received the Hujiang Leading Talent Award (2023-2026) from Shanghai University of Science and Technology. Her academic excellence has been recognized through university-level honors, including the Outstanding Union Activist Award (2024) and the Excellence in Teaching Assistant Award (2023). These accolades underscore her leadership in advancing nanomaterials for energy applications.

📖 Top Noted Publications

Dr. Ding Yuan has published over 40 peer-reviewed articles in top-tier journals, with more than 1,500 citations. Some of her most notable publications include:

  • Yuan, D., et al. (2023). “Defect Engineering in Ultrathin 2D Materials for Energy Storage.” Chemical Reviews. DOI | Cited by: 200+ articles.
  • Yuan, D., et al. (2022). “Heterostructure Engineering of Transition Metal Chalcogenides for High-Performance Batteries.” Advanced Materials. DOI | Cited by: 180+ articles.
  • Yuan, D., et al. (2021). “Atomically Thin 2D Transition Metal Oxides for Water Splitting.” Angewandte Chemie International Edition. DOI | Cited by: 160+ articles.
  • Yuan, D., et al. (2021). “Boosting Pseudocapacitive Behavior in Sodium-Ion Batteries with Vacancy-Engineered 2D Materials.” Cell Reports Physical Science. DOI | Cited by: 140+ articles.
  • Yuan, D., et al. (2020). “Soft-Template Synthesis of Ultrathin Layered Double Hydroxides for High-Performance Supercapacitors.” Chemical Engineering Journal. DOI | Cited by: 120+ articles.

Conclusion

Dr. Yuan Ding is highly suitable for the “Best Researcher Award.” Her strong research impact, prestigious funding, international collaborations, and leadership in 2D materials for energy applications make her a strong candidate. With continued industry collaboration and further leadership in global scientific communities, she has the potential to become a top-tier scientist in the energy materials field.

 

Yuhai Dou | Materials Science | Best Researcher Award

Prof. Dr. Yuhai Dou | Materials Science | Best Researcher Award

Vice President, at University of Shanghai for Science and Technology, China.

Dr. Yu Hai Dou is a Professor at Shanghai University of Science and Technology (USST), where he serves as the Executive Vice Dean of the Department of Hydrogen Energy and Fuel Cells. He is an expert in atomic-level ultra-thin two-dimensional new energy materials, focusing on hydrogen energy and fuel cells. With extensive experience in advanced materials science and nanotechnology, Dr. Dou has worked as a researcher and collaborator with renowned institutions like Griffith University and the University of Wollongong. His leadership and expertise have garnered numerous national and international awards, solidifying his place as a key figure in materials science research. He has contributed significantly to hydrogen production and energy storage solutions, aiming for sustainable energy advancements.

Professional Profile

Education 🎓

Dr. Dou completed his undergraduate and master’s studies in Materials Science and Engineering at Central South University, China, specializing in powder metallurgy. He then pursued his Ph.D. at the University of Wollongong, Australia, under the supervision of Academician Shih and Professor Ziqi Sun, where he focused on atomic-level ultra-thin two-dimensional materials for lithium/sodium-ion batteries and electrocatalysis for oxygen evolution. His academic journey continued with significant postdoctoral work at Griffith University, collaborating with Professor Huijun Zhao on innovative catalysts for hydrogen production and advanced energy storage technologies. His educational background has equipped him with a comprehensive understanding of energy materials and catalysis at the atomic scale.

Experience 💞

Dr. Dou’s professional career spans several prestigious institutions and research roles. As a Professor at USST, he is a driving force in the development of hydrogen energy and fuel cell technology. He has also been involved in cutting-edge research projects at Griffith University and the University of Wollongong, where he led pioneering work on atomic-level catalysts and energy-efficient materials. In addition, Dr. Dou has contributed to the development of several high-impact projects, including national and international collaborations on hydrogen energy and fuel cell advancements. His roles have also included serving as the Chair of the Materials Science Research Center and the Academic Committee at Shandong Advanced Technology Institute, China.

Research Interests 🔎

Dr. Dou’s research is centered on atomic-level ultra-thin two-dimensional materials, particularly in the areas of hydrogen energy, fuel cells, and energy storage. His work includes the development of efficient electrocatalysts for water splitting, hydrogen production, and advanced energy storage systems like sodium-ion batteries. Additionally, he is interested in designing innovative materials for renewable energy applications, including those used in fuel cells and energy conversion technologies. His pioneering work on single-atom catalysts and defect engineering has significantly advanced the field of materials science, making strides toward more sustainable energy solutions.

Awards 🏆

Dr. Dou’s career has been marked by numerous prestigious awards. He received the “Overseas Postdoctoral Talent Introduction Project” from the Ministry of Human Resources and Social Security in China, as well as several national-level recognitions such as the “Excellent Young Scientist” award from Australia and the “Taishan Scholar” award from Shandong Province. In 2020, his paper won the China Top Cited Paper Award, and he was also nominated for the World Advanced Materials Association Youth Scientist Gold Award. His accolades reflect his impact on both national and international levels, particularly in the field of materials science and energy research.

Top Noted Publications 📝

Dr. Dou has published extensively in high-impact journals on materials science, catalysis, and energy storage. His work includes groundbreaking research on atomic-level catalysts and ultra-thin two-dimensional materials. His publications have been cited in numerous international articles, showcasing his contributions to the advancement of hydrogen energy and catalysis. Some of his key papers include:

  • “Single-Atom Catalysts on Atomically Thin Nanomaterials for H₂O₂ Production” (2021, Nature Communications).
  • “Atomically Thin 3d Transition Metal Electrocatalysts for Water Splitting” (2020, Advanced Materials).
    For further exploration of his work, his published articles can be accessed via the journal links.

Conclusion

Dr. Yu Hai Dou exemplifies the qualities of a leading researcher in the realm of energy materials and sustainable technologies. His impressive list of awards, significant research funding, and collaborative work in high-impact projects make him an outstanding candidate for the Best Researcher Award. His contributions to hydrogen energy research and electrocatalysis are critical to advancing renewable energy technologies. With continued expansion into industry applications and fostering young talent, Dr. Dou can further amplify his already substantial impact on the scientific community and beyond.

Prof. Mir Mohammad Alavi Nikje | Polyurethane | Best Researcher Award

Prof. Mir Mohammad Alavi Nikje | Polyurethane | Best Researcher Award

Professor at Polyurethane, Imam khomeini International University, Iran

Mir Mohammad Alavi Nikje is an Iranian professor specializing in Organic Chemistry. He was born in 1969 in Ardebil, Iran. Currently, he holds the position of Professor in the Department of Chemistry at the Faculty of Science, Imam Khomeini International University in Qazvin, Iran. He is married and can be contacted at his office address: Department of Chemistry, Faculty of Science, Imam Khomeini International University, P.O.Box 288, Qazvin, Iran.

Professional Profiles:

Education:

Prof. Mir Mohammad Alavi Nikje has a diverse educational background, having earned his B.Sc. in Applied Chemistry from Tehran University, Tehran, Iran, in 1987-1991. He furthered his studies with an M.Sc. in Organic Chemistry from Tehran University, Tehran, Iran, completing this degree in 1991-1994. Continuing his academic pursuits, Prof. Nikje achieved a Ph.D. in Organic Chemistry from Teacher Training University, Tehran, Iran, in 1995-2001. His academic journey reflects a commitment to advancing his knowledge and expertise in the field of chemistry, particularly in organic chemistry.

Research Interest:

Prof. Mir Mohammad Alavi Nikje has expertise and research interests in various areas of polymer chemistry and waste management. His work encompasses polymer recycling and functionalization, organic preparation, bio-based polymers, and composites. He also focuses on nanocomposites, polyurethane synthesis and application, and the application of microwave techniques in polymer chemistry. Additionally, Prof. Nikje is involved in research related to waste recycling, including domestic, urban, and hospital waste. He also works on waste water treatment, particularly for high BOD (Biochemical Oxygen Demand) and COD (Chemical Oxygen Demand) contained water wastes, contributing to sustainable and environmentally friendly solutions.

Patents:

Prof. Mir Mohammad Alavi Nikje holds several patents in the field of polymer chemistry and waste management. One of his patents, Iranian Patent No. 39078 from 2006, is related to the chemical recycling of PET wastes and the application of the recyclate in the production of rigid polyurethane foams. Another patent, Iranian Patent No. 40802 from 2007, focuses on the chemical recycling of rigid polyurethane foams. Additionally, Prof. Nikje has a patent (Iranian Patent No. 740803, 2007) for the recycling of polyol from flexible foam wastes and its application in the production of both rigid and flexible foams. His most recent patent, from 2021, involves the conversion of PET scraps to oil-modified APP for producing metal face polyurethane sandwich panels. These patents highlight Prof. Nikje’s innovative work in developing sustainable solutions for polymer recycling and the production of high-quality foams.

Other Activities:

During his sabbatical leave at UPM, Malaysia in 2010-2011, Prof. Mir Mohammad Alavi Nikje conducted research on wastewater treatment, focusing on urban, hospital, and industrial waste management and recycling. He gained valuable experience in treating urban, hospital, and industrial waste at both pilot and industrial scales using innovative methods. Prof. Nikje is also a regular reviewer for several prestigious journals, including the “Journal of Applied Polymer Science,” “Iranian Rubber Magazine,” “Journal of Applied Chemical Researches,” “Polymer International,” and “Iranian Polymer Journal.” His expertise and contributions as a reviewer demonstrate his commitment to advancing research in polymer science and waste management.

Publications:

  1. Polyurethane waste reduction and recycling: From bench to pilot scales
    • Authors: MMA Nikje, AB Garmarudi, AB Idris
    • Citations: 85
    • Year: 2011
  2. Microwave‐assisted depolymerization of poly (ethylene terephthalate)[PET] at atmospheric pressure
    • Authors: MMA Nikje, F Nazari
    • Citations: 67
    • Year: 2006
  3. Thermal and mechanical properties of polyurethane rigid foam/modified nanosilica composite
    • Authors: MMA Nikje, ZM Tehrani
    • Citations: 64
    • Year: 2010
  4. Silanization of multi-walled carbon nanotubes and the study of its effects on the properties of polyurethane rigid foam nanocomposites
    • Authors: A Yaghoubi, MMA Nikje
    • Citations: 59
    • Year: 2018
  5. Microwave assisted “split-phase” glycolysis of polyurethane flexible foam wastes
    • Authors: MM Alavi Nikje, M Nikrah, M Haghshenas
    • Citations: 50
    • Year: 2007
  6. Glycerin as a new glycolysing agent for chemical recycling of cold cure polyurethane foam wastes in “split-phase” condition
    • Authors: MM Alavi Nikje, M Nikrah
    • Citations: 48
    • Year: 2007
  7. Microwave-assisted polyurethane bond cleavage via hydroglycolysis process at atmospheric pressure
    • Authors: MMA Nikje, M Nikrah, FHA Mohammadi
    • Citations: 43
    • Year: 2008
  8. Regeneration of polyol by pentaerythritol-assisted glycolysis of flexible polyurethane foam wastes
    • Authors: NMM ALAVI, GA BAGHERI
    • Citations: 41
    • Year: 2010
  9. Preparation of magnetic polyurethane rigid foam nanocomposites
    • Authors: MM Alavi Nikje, MA Farahmand Nejad, K Shabani, M Haghshenas
    • Citations: 37
    • Year: 2013
  10. Glycolysis of polycarbonate wastes with microwave irradiation
    • Authors: MM Nikje
    • Citations: 37
    • Year: 2011

 

Prof Dr. Hoda A. Ahmed | Material Science | Women Researcher Award

Prof Dr. Hoda A. Ahmed | Material Science | Women Researcher Award

Chemistry Department at Material Science, Taibah University, Saudi Arabia

ðŸ‘Ļ‍🎓She remarkable academic journey, extensive research contributions, and dedication to the field of psychology are truly commendable. Your wealth of knowledge and diverse skill set reflect a deep commitment to understanding and addressing critical issues such as bullying, inclusion, and socialization.

🔎 She successful completion of a PhD in Psychology, along with the numerous advanced courses and workshops, showcases your continuous pursuit of excellence and expertise in your field.

🏆 The awards and recognitions, including the First Place in the Poster Award at the University of Stavanger, underscore the impact of your research and the high regard it holds in the academic community.

Professional Profiles:

Education:

Prof. Dr. Hoda A. Ahmed has a distinguished academic background in Chemistry, with a B.Sc. in Chemistry (Very good with honors) from Cairo University – Faculty of Science – Chemistry Department, obtained in 2006. She began her career as an Instructor at Cairo University – Faculty of Science in May 2007 and completed pre-master courses in 2007-2008. Dr. Ahmed went on to earn her M.Sc. in Physical Chemistry from Cairo University – Faculty of Science – Chemistry Department in 2009, with a thesis titled “Steric Interaction and Phase Behavior of Some Laterally Substituted Liquid Crystalline Compounds.” Continuing her academic journey, she became an Assistant Lecturer at Cairo University – Faculty of Science (Physical Chemistry) in December 2009. Dr. Ahmed further pursued her studies and obtained a Ph.D. in Physical Chemistry from Cairo University – Faculty of Science – Chemistry Department in 2012. Her doctoral thesis was on the “Effect of Polarity, Position, and number of Lateral Substituents on the Mesophase Behavior of Some Model Compounds in Pure and Mixed States.” Dr. Ahmed’s dedication and expertise in Physical Chemistry led to her appointment as a Lecturer at Cairo University – Faculty of Science (Physical Chemistry) in July 2012. She continued to advance in her academic career, becoming an Associate Professor at Cairo University – Faculty of Science (Physical Chemistry) in July 2017. In August 2018, Dr. Ahmed joined Taibah University – Faculty of Science (Physical Chemistry) as an Associate Professor. Demonstrating her excellence in the field, Dr. Ahmed was promoted to Full Professor at Cairo University – Faculty of Science (Physical Chemistry) in September 2022. She further expanded her academic reach by becoming a Full Professor at Taibah University – Faculty of Science (Physical Chemistry) in September 2023. Dr. Ahmed’s contributions to Physical Chemistry have been recognized through her academic achievements and professional advancements, making her a respected figure in the field.

Research Interest:

Dr. Hoda A. Ahmed’s research interests and areas of expertise encompass a wide range of topics in Chemistry. She is particularly focused on the synthesis and characterization of novel liquid crystalline materials. Her work involves the investigation of liquid crystals using various techniques such as DSC, POM, XRD, and electro-optic techniques. Dr. Ahmed is also interested in the applications of liquid crystalline materials, optical materials, and polymers. Additionally, she is involved in research related to the fabrication of new low-cost solar cells for high-efficiency electricity generation. Dr. Ahmed is also engaged in the preparation and characterization of new nanomaterial composites for industrial applications and water treatment. Her research interests extend to computational chemistry and its applications, as well as the preparation of new green products with wide industrial and pharmacological applications. Dr. Ahmed’s diverse research portfolio reflects her commitment to advancing the field of Chemistry through innovative research and practical applications.

Experience:

Dr. Hoda A. Ahmed has acquired extensive instrumental training in various analytical techniques, including Polarized Optical Microscopy (POM), Differential Scanning Calorimetry (DSC), UV-Spectrophotometry, FT-IR, XRD, SEM, TEM, and electro-optic investigation of liquid crystals and polymers. Her proficiency in these techniques has been honed through practical experience and academic training, enabling her to conduct advanced research in her field. Furthermore, Dr. Ahmed has received certificates from the Faculty of Science at Cairo University through the Graduate Research Challenge Program in 2010 (GRCF). These certificates attest to her participation and successful completion of the program, highlighting her commitment to continuous learning and professional development.

Teaching Experince:

Dr. Hoda A. Ahmed has been actively engaged in teaching and tutoring at Cairo University, specifically in the Department of Chemistry, Faculty of Science, since 2007. Her teaching responsibilities have evolved over the years, reflecting her expertise and commitment to undergraduate education. As a Teaching Assistant from 2007 to 2009, Dr. Ahmed contributed significantly to the teaching and tutoring of practical courses, with a percentage contribution ranging from 70-80%. Her role involved assisting in the teaching of Physical Chemistry and General Chemistry for first-year undergraduates, providing instruction on Thermodynamic Chemistry for second-year and Bachelor students, and delivering lectures on the Physical Chemistry of Polymers for third-year undergraduates.

Award & Honor:

Dr. Hoda A. Ahmed has received several prestigious awards and accolades throughout her career, highlighting her outstanding contributions to scientific research and academia. In March 2007, she was honored with the Hamed Khalefa Award by the Department of Chemistry at Cairo University, recognizing her as one of the top ten students in the Chemistry group. Dr. Ahmed’s excellence in scientific research has been consistently recognized, as evidenced by the Award for the Best Scientific Research Publications from Cairo University for the years 2009 to 2023. Her impactful research has also earned her a place on the list of scientific researchers in the “World Ranking of Top 2% Scientists” according to surveys conducted by Stanford University in both 2021 and 2022. Furthermore, Dr. Ahmed’s commitment to addressing global challenges through her research was acknowledged with the Elsevier Award for an article linked to the United Nations Sustainable Development Goals. Her work on the enhanced adsorption removal of phosphate from water by Ag-doped PVA-NiO nanocomposite, prepared by the pulsed laser ablation method, was recognized for its potential to contribute to solutions for some of the world’s most pressing issues.

Publications:

H Ahmed, DP HÃĪder (2010). Rapid ecotoxicological bioassay of nickel and cadmium using motility and photosynthetic parameters of Euglena gracilis. Environmental and Experimental Botany 69 (1), 68-75. [Citations: 94]

H Ahmed, DP HÃĪder (2010). A fast algal bioassay for assessment of copper toxicity in water using Euglena gracilis. Journal of Applied Phycology 22, 785-792. [Citations: 51]

H Ahmed, DP HÃĪder (2011). Monitoring of waste water samples using the ECOTOX biosystem and the flagellate alga Euglena gracilis. Water, Air, & Soil Pollution 216 (1-4), 547-560. [Citations: 40]

M Salama, HA Abdelaziz, MHZ El-Dien (2014). Effect of soil type on the allelopathic activity of Medicago sativa L. residues in Vicia faba L. agroecosystems. Journal of Taibah University for Science 8 (2), 84-89. [Citations: 32]

HAEAM Ahmed (2010). Biomonitoring of aquatic ecosystems. Friedrich-Alexander-UniversitÃĪt Erlangen-NÞrnberg (FAU). [Citations: 17]

SM El-Darier, HA Ahmed, M Razik, MES Allam (2015). Detoxification of olive-mill solid waste and its probable application as organic fertilizer. Journal of Fertilizers and Pesticides 6 (2), 154-169. [Citations: 11]

HA Ahmed, SM El-Darier (2022). Phytochemistry, allelopathy and anticancer potentiality of Withania somnifera (L.) Dunal (Solanaceae). Brazilian Journal of Biology 84. [Citations: 6]

H Ahmed, SE Darier, M Migahid, K Belkasem (2019). Biological activity of Moringa oleifera Lam. on Citrullus lanatus (Thunb.) in sustainable agriculture practices. Advances in Environmental Biology 13 (7), 1-9. [Citations: 5]

H Ahmed, DP HÃĪder (2010). Short-term bioassay of chlorophenol compounds using Euglena gracilis. SRX Ecology 2010. [Citations: 5]

HA Ahmed, SM El-Darier, MHZ El-Dien (2014). Role of soil moisture in allelopathic activity of Medicago sativa L. residues in Zea mays L. fields. Journal of Global Biosciences 3 (5), 835-847. [Citations: 2]

 

Dr. Theodoros Chrysanidis | Structural Engineering | Best Researcher Award

Dr. Theodoros Chrysanidis | Structural Engineering | Best Researcher Award

ADJUNCT LECTURER / RESEARCHER at Structural Engineering, UNIVERSITY OF THESSALY, Greece

ðŸ‘Ļ‍🎓He remarkable academic journey, extensive research contributions, and dedication to the field of psychology are truly commendable. Your wealth of knowledge and diverse skill set reflect a deep commitment to understanding and addressing critical issues such as bullying, inclusion, and socialization.

🔎 He successful completion of a PhD in Psychology, along with the numerous advanced courses and workshops, showcases your continuous pursuit of excellence and expertise in your field.

🏆 The awards and recognitions, including the First Place in the Poster Award at the University of Stavanger, underscore the impact of your research and the high regard it holds in the academic community.

Professional Profiles:

Education:

Dr. Theodoros Chrysanidis completed his secondary education at the 2nd High School of Kavala and the Polykladiko Lyceum of Kavala. He obtained his Certificate of Studies of Lyceum from the Polykladiko Lyceum of Kavala with a grade of 196/8, earning a distinction. Following the Pan-Hellenic examinations, he enrolled in the Department of Civil Engineering at the School of Engineering of Aristotle University of Thessaloniki (A.U.Th.), where he pursued his undergraduate studies from 1996 to 2001. He graduated with a Diploma of Civil Engineering from the Department of Civil Engineering of A.U.Th. with a grade of 8.0, marking a “Very Good” performance. Dr. Chrysanidis received a Certificate of Academic Equivalence of his Diploma of Civil Engineering from A.U.Th. to diplomas under the international name MASTER in 2010. Continuing his academic journey, he became a postgraduate student in the postgraduate program of study “Earthquakeresistant Design of Structures” at the Department of Civil Engineering of A.U.Th. in 2001-2002, obtaining a Postgraduate Diploma of Specialization with a grade of 8.2, also marked as “Very Good.” Dr. Chrysanidis furthered his education by pursuing postgraduate studies in the program “Structural Steel Design and Business Management” at the Department of Civil and Environmental Engineering of Imperial College of Science, Technology and Medicine of the University of London from 2004 to 2005. He earned a Postgraduate Diploma Master of Science (MSc) with a Distinction, achieving a grade of 9.01, and also received the Diploma of Imperial College of Science, Technology and Medicine (DIC).

Theodoros Chrysanidis ‘s citation metrics and indices from Google Scholar are as follows:

  • Cited by: All: 584, Since 2018: 492
  • Citations: 584 (All), 492 (Since 2018)
  • h-index:  12 (All), 12 (Since 2018)
  • i-10index: 24 (All), 21 (Since 2018

These metrics showcase the impact of Chrysanidis ‘s work within the academic community, demonstrating the number of citations his publications have received and the influence of his research output.

Professional Experience:

Dr. Theodoros Chrysanidis has a diverse professional background, starting with his work in a private consulting and construction company from April to September 2004. Here, he was involved in supervising and monitoring construction works in reinforced concrete structures, managing materials, organizing construction sites, and monitoring project economics. From June to December 2006, Dr. Chrysanidis worked at the private consulting and construction company E.M.BI.K. S.A., focusing on static and dynamic analyses of steel industrial buildings and supervising projects in all phases of construction. Since 2005, he has been involved in consulting and supervising private technical projects and, since 2006, has been estimating real estate commercial values as an External Estimator at the Commercial Bank of Greece. Dr. Chrysanidis has also been teaching as an adjunct Lecturer at Universities and Technological Educational Institutes since 2012 and carrying out energy inspections as an Energy Inspector since 2013.

Educational Experience:

From 2009 to 2023, Dr. Theodoros Chrysanidis has been actively involved in teaching at various academic institutions and educational establishments. His teaching engagements include positions at prestigious institutions such as the Democritus University of Thrace, specifically the Polytechnic School of Xanthi, the International Hellenic University, and the Hellenic Open University. Additionally, he has taught at the University of Western Macedonia in Koila Kozanis, the University of Thessaly in both Karditsa and Larisa, and the Polytechnic School of Volos, which is also part of the University of Thessaly. Furthermore, Dr. Chrysanidis has contributed to the education sector at the Technological Educational Institute of Thessaloniki, the Technological Educational Institute of Kavala, and the Technological Educational Institute of Larisa. His educational reach also extends to Akmi Metropolitan College in Thessaloniki, showcasing his dedication to imparting knowledge across a wide range of academic and technical disciplines.

Teaching Course:

From 2009 to 2023, Dr. Theodoros Chrysanidis has taught a variety of courses, including Strength of Materials, which includes laboratory teaching hours, 2D Computer Design – Technical Drawing with laboratory hours, and Special Statics Chapters, also with laboratory teaching hours. He has also taught Special Concrete Constructions, Concrete Applications in Technical Projects, and Construction of Buildings, all with laboratory teaching components. In addition to these, Dr. Chrysanidis has taught Mathematics I and Mathematics II, as well as courses on Steel and Composite Constructions, Reinforced Concrete (with laboratory hours), Reinforced Concrete I, Reinforced Concrete II, and Reinforced Concrete III (with laboratory hours). He has also covered Prestressed Concrete, Statics, Statics II (with laboratory hours), Design of Earthquake-Resistant Structures, and Technical Road Construction Works. These courses demonstrate his comprehensive expertise in civil engineering and structural design.

Research Interest:

Dr. Theodoros Chrysanidis has a diverse range of research interests in the field of civil engineering and earthquake engineering. His interests include earthquake engineering, concrete technologies, and concrete material technology. He is also interested in construction technology, structural reliability, and construction economics. Additionally, Dr. Chrysanidis focuses on topics such as seismics, constructions, buildings, and construction engineering. His research extends to building materials, construction materials, and civil engineering technology. He is also involved in research related to structural analysis, structural stability, and structural dynamics. Furthermore, Dr. Chrysanidis is interested in steel structures, steel design, and topics related to cracking, structural walls, and sustainability in construction. His broad range of research interests demonstrates his commitment to advancing knowledge in various aspects of civil engineering and earthquake engineering.

Publications:

  1. T.A. Chrysanidis, I.A. Tegos (2012), “The influence of tension strain of wall ends to their resistance against lateral instability for low-reinforced concrete walls,” 15th World Conference on Earthquake Engineering, 35 citations, 2012.
  2. T. Chrysanidis (2019), “Influence of elongation degree on transverse buckling of confined boundary regions of R/C seismic walls,” Construction and Building Materials, 211, 703-720, 32 citations, 2019.
  3. T.A. Chrysanidis, I. Tegos (2020), “Axial and transverse strengthening of R/C circular columns: Conventional and new type of steel and hybrid jackets using high-strength mortar,” Journal of Building Engineering, 30, 101236, 31 citations, 2020.
  4. T.A. Chrysanidis (2020), “Evaluation of out-of-plane response of r/c structural wall boundary edges detailed with maximum code-prescribed longitudinal reinforcement ratio,” International Journal of Concrete Structures and Materials, 14(1), 1-21, 30 citations, 2020.
  5. T.A. Chrysanidis, I. Tegos (2014), “Modeling and simulation of pneumatic brake system used in heavy commercial vehicle,” IOSR Journal of Mechanical and Civil Engineering, 11(1), 1-9, 28 citations, 2014.
  6. T. Chrysanidis (2021), “The effect of longitudinal reinforcement ratio on the lateral buckling behavior of R/C walls modelled using prism elements,” Journal of Building Engineering, 42, 102456, 20 citations, 2021.
  7. T. Chrysanidis, V. Panoskaltsis, I. Tegos (2016), “Preliminary design and analysis of cost parameters of a high-rise building: Braced shear wall core system,” International Journal of Civil Engineering and Technology, 7(5), 137-152, 17 citations, 2016.
  8. T. Chrysanidis (2023), “Experimental and numerical research on cracking characteristics of medium-reinforced prisms under variable uniaxial degrees of elongation,” Engineering Failure Analysis, 145, 107014, 14 citations, 2023.
  9. T. Chrysanidis, I. Tegos (2016), “Size of seismic tensile strain and its influence on the displacements due to transverse buckling of ultra-highly reinforced structural walls,” ARPN Journal of Engineering and Applied Sciences, 11(23), 13884-13890, 14 citations, 2016.
  10. T.A. Chrysanidis, I.A. Tegos (2016), “Influence of elongation degree on out-of-plane buckling of R/C structural walls with a medium high reinforcement ratio,” International Journal of Civil Engineering and Technology, 7(4), 358-364, 13 citations, 2016.

 

 

Dr. Yuri Kadin | Mechanics of materials | Best Researcher Award

Dr. Yuri Kadin : Leading Researcher in Mechanics of materials

Senior researcher at Mechanics of materials, SKF RTD, Netherlands

He remarkable academic journey, extensive research contributions, and dedication to the field of psychology are truly commendable. Your wealth of knowledge and diverse skill set reflect a deep commitment to understanding and addressing critical issues such as bullying, inclusion, and socialization.

🔎 He successful completion of a PhD in Psychology, along with the numerous advanced courses and workshops, showcases your continuous pursuit of excellence and expertise in your field.

🏆 The awards and recognitions, including the First Place in the Poster Award at the University of Stavanger, underscore the impact of your research and the high regard it holds in the academic community.

Professional Profiles:

Education:

Dr. Shaymaa Kassab completed her academic degrees as follows:

Ph.D. (Direct Track) in Mechanical Engineering (2004 – 2008): Obtained from the Mechanical Engineering Department at the Technion – Israel Institute of Technology. Her thesis was titled “Cyclic Loading of an Elastic-Plastic Spherical Contact.” B.Sc. in Mechanical Engineering (2000 – 2004): Achieved with a focus on Biomechanics & Medical Engineering and Mechanics of Materials & Micro-systems/MEMS (Summa cum Laude).

Work Experience;

Dr. Shaymaa Kassab has worked at SKF Company – Engineering Research Center in Houten, the Netherlands, with the following roles: Senior Researcher: Since 2014 – Present. Researcher: From 2009 to 2014.

Research Interest:

Finite Elements Method (development of own codes and commercial packages), Computational contact and fracture mechanics, Fatigue, Creep, Mechanics of polymers (viscoelasticity/plasticity), Diffusion, Hydrogen in steels (diffusion & embrittlement), Tribology, Adhesion, Composite materials, Elasticity, Thermo-mechanics, Plasticity, Shakedown theory, Law-cycle fatigue.

Academical Project:

Design of a Medical Device – Forceps of Parallel Action: Involved in the design of a medical device, specifically forceps of parallel action. Development of FEM Code (MATLAB) for Modal Analysis: Developed Finite Element Method (FEM) code using MATLAB for modal analysis. Dynamical FEM Modeling of Wave Propagation: Conducted dynamical FEM modeling of wave propagation. Non-linear Vibrations Analysis: Engaged in non-linear vibrations analysis. Development of MEMS Sensor: Contributed to the development of a Microelectromechanical Systems (MEMS) sensor. Interactive Graphics: Worked on interactive graphics. Teaching Assistant (2004 – 2008): Served as a Teaching Assistant at the university.

Awards:

Dr. Shaymaa Kassab has received several awards and honors throughout her career, including:

  • 2015: SKF Excellence Award
  • 2009: Edmond Safra Prize for the PhD thesis
  • 2009: Most Sited Author for 2005-2008 in Int. J. Solids and Structures
  • 2007: Pollack Scholarship
  • 2006: Zeff Scholarship

 

Dr. Arif Nawaz | Material Chemistry | Best Researcher Award

Dr. Arif Nawaz : Leading Researcher in Material Chemistry 

Lecturer at Biotechnology, Material Chemistry, Bacha Khan University Charsadda, Pakistan

Your remarkable academic journey, extensive research contributions, and dedication to the field of psychology are truly commendable. Your wealth of knowledge and diverse skill set reflect a deep commitment to understanding and addressing critical issues such as bullying, inclusion, and socialization.

🔎 Your successful completion of a PhD in Psychology, along with the numerous advanced courses and workshops, showcases your continuous pursuit of excellence and expertise in your field.

🏆 The awards and recognitions, including the First Place in the Poster Award at the University of Stavanger, underscore the impact of your research and the high regard it holds in the academic community.

Professional Profiles:

Education:

Ph.D. (2016-2021): Institute of Chemical Sciences (ICS), University of Peshawar, Pakistan. M.Phil (2011-2015): Institute of Chemical Sciences (ICS), University of Peshawar, Pakistan. Master’s (M.Sc) in Inorganic Chemistry (2008-2010): Institute of Chemical Sciences (ICS), University of Peshawar, Pakistan (1st Division). Graduation (B.Sc) in Chemistry, Zoology, and Botany (2006-2008): Govt. Superior Science College, Peshawar, University of Peshawar, KP, Pakistan (1st Division). Intermediate (F.Sc) in Chemistry, Physics, and Biology (2004-2006): Board of Intermediate and Secondary Education, KP, Pakistan (1st Division).

Teaching/ Professional Experience:

Lecturer, Department of Chemistry, Bacha Khan University, Charsadda, Pakistan, 13-02-2013- 20-06-2016 (Contract basis). Lecturer, Department of Chemistry, Bacha Khan University, Charsadda, Pakistan. 21-06-2016- Till date

Conferences:

HEC Three-day workshop on “Understanding Learners Psychology and Developing Critical Thinking” held from January 9-11, 2018, at Bacha Khan University Charsadda. Seminar on “State-of-the-art Cathode Materials For Lithium-ion Batteries: An Industrial Perspective” at Bacha Khan University Charsadda. One-day workshop on “Academic and Scientific Writing” at Bacha Khan University Charsadda. Workshop on “Writing Scientific Papers and Publications – Showcasing the Scientific Talent to the World” at COMSAT Institute of Information Technology (CIIT). Presentations on “Writing Quality Manuscripts” at the Center for Human Resource and Career Development, University of Peshawar.

Research Interest:

Computational and Experimental designing of Novel visible light driven Catalysts (ternary ferrites, polyvalent cationic perovskites) for Wastewater treatment. Fabrication of multinary double and single perovskites as an efficient photo catalyst, good capacitor and heavy metals sensor, Metal Organic Frameworks, Novel ternary and quaternary Oxides/Selenides for PL downshifting and its applications in Solar Cells.

 

 

Assoc Prof Dr. Laongdaw Techawinyutham | Polymer

Assoc Prof Dr. Laongdaw Techawinyutham : Leading Researcher in Polymer

Lecturer and Researcher at Microbiology, King Mongkut’s University of Technology North Bangkok ,Thailand

Your remarkable academic journey, extensive research contributions, and dedication to the field of psychology are truly commendable. Your wealth of knowledge and diverse skill set reflect a deep commitment to understanding and addressing critical issues such as bullying, inclusion, and socialization.

🔎 Your successful completion of a PhD in Psychology, along with the numerous advanced courses and workshops, showcases your continuous pursuit of excellence and expertise in your field.

🏆 The awards and recognitions, including the First Place in the Poster Award at the University of Stavanger, underscore the impact of your research and the high regard it holds in the academic community.

Professional Profiles:

Education:

Dr. [First Name] [Surname] holds a Certificate in Technical Education (Pre Mechanical Engineering) from King Mongkut’s University of Technology North Bangkok (KMUTNB), which was conferred in May 2006 – March 2009, with a GPA of 3.51. Following this, [he/she] obtained a Bachelor of Engineering (Production Engineering) from the same institution in May 2009 – March 2012, graduating with First Class Honors and a GPA of 3.77. During [his/her] undergraduate studies, [he/she] received a scholarship from Thai Parkerizing CO., Ltd. every year and achieved outstanding performance, ranking top of [his/her] class. [His/Her] thesis focused on the study of Vacuum System for Plastic Injection Mold. Subsequently, [he/she] pursued a Master of Engineering (Materials and Production Engineering) at The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), KMUTNB, from August 2013 to December 2015, achieving a GPA of 3.75. [He/She] received a full-tuition fee scholarship from KMUTNB and conducted a thesis titled “Polypropylene/Maleic Anhydride Grafted Polypropylene (MAgPP)/Coconut Fiber Composites.” [Finally/Currently], [he/she] completed a Doctor of Engineering (Mechanical Engineering) at The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), KMUTNB, from August 2016 to May 2019. During this time, [he/she] received a full-tuition fee scholarship from Bangchak Co., Ltd. and a living cost scholarship from KMUTNB. [His/Her] doctoral thesis focused on the “Development of Capsicum Oleoresin (CO) as Anti-bacterial and Anti-rodent Agent in Polymer Composites.”

Experience:

The researcher has been involved in various research projects and roles, demonstrating a diverse skill set and expertise. In 2018, [he/she] conducted research in “Improvement plastic compound from recycled high-density polyethylene (HDPE) from community waste pond replacing virgin plastic for producing feature board” (āļāļēāļĢāļžāļąāļ’āļ™āļēāđ€āļĄāđ‡āļ”āļžāļĨāļēāļŠāļ•āļīāļāļ„āļ­āļĄāđ€āļ›āļēāļ§āļ”āđŒāļˆāļēāļāļžāļĨāļēāļŠāļ•āļīāļāļĢāļĩāđ„āļ‹āđ€āļ„āļīāļĨ HDPE āļˆāļēāļāļšāđˆāļ­āļ‚āļĒāļ°āļŠāļļāļĄāļŠāļ™āđ€āļžāļ·āđˆāļ­āđƒāļŠāđ‰āļ—āļ”āđāļ—āļ™āđ€āļĄāđ‡āļ”āļžāļĨāļēāļŠāļ•āļīāļāļšāļĢāļīāļŠāļļāļ—āļ˜āļīāđŒ āđƒāļ™āļāļēāļĢāļœāļĨāļīāļ•āđāļœāđˆāļ™āļžāļĨāļēāļŠāļ•āļīāļāļĨāļđāļāļŸāļđāļ) with Material Plast Co., Ltd. as part of the Innovation Technology Assistance Program (ITAP). [He/She] also served as an Assistant Researcher and Staff in Promotion Center Region 7 and Region 8 in 2018. Moreover, [he/she] conducted research on the “Effect of Capsicum Oleoresin (CO) on Antimicrobial, Morphology, and Mechanical and Thermal Properties of Polylactic Acid (PLA) Film” under the Biodiversity-based Economy Development Office (Public Organization) (BEDO) from 2018 to 2019, both as an Assistant Researcher and a Researcher. Additionally, [he/she] served as the Treasurer and Session advisor in the session of Lightweight and sustainable materials at the International Symposium on Lightweight and Sustainable Polymeric Materials (LSPM’23) held on February 17, 2023, at King Mongkut’s University of Technology North Bangkok (KMUTNB), Bangkok, Thailand. These experiences highlight [his/her] active involvement in research and academic activities, showcasing [his/her] commitment to advancing knowledge in [his/her] field.

Laongdaw Techawinyutham ‘s citation metrics and indices from Google Scholar are as follows:

  • Cited by: All: 245, Since 2018: 244
  • Citations: 245 (All), 244 (Since 2018)
  • h-index: 7 (All), 7 (Since 2018)
  • i10-index: 6 (All), 6 (Since 2018)

PUBLICATION:

1.Characterization of alkaline and silane treated fibers of ‘water hyacinth plants’ and reinforcement of ‘water hyacinth fibers’ with bioepoxy to develop fully biobased

  • Published in Energy in 2020 with 68 citations.

2.Influence of accelerated weathering on the thermo-mechanical, antibacterial, and rheological properties of polylactic acid incorporated with porous silica-containing varying

  • Published in Energy in 2019 with 32 citations.

3.Polypropylene/maleic anhydride grafted polypropylene (MAgPP)/coconut fiber composites

  • Published in Energy in 2016 with 31 citations.

4.Recycled LDPE/PETG blends and HDPE/PETG blends: Mechanical, thermal, and rheological properties

  • Published in Energy in 2021 with 28 citations.

5.Thermo-mechanical characterization of new natural cellulose fiber from Zmioculus Zamiifolia

  • Published in Energy in 2021 with 26 citations.