Assoc Prof Dr. Fathy Mohamed | Waste Water Treatment | Best Researcher Award

Head of water & Environment Department at Ben-suef University, Egypt.

Dr. Fathy Mohamed is an Associate Professor of Physical Chemistry and Head of the Water and Environment Department at Beni-Suef University, Egypt. With 25 years of experience, he has excelled in roles spanning from chemist to quality sector head. Dr. Fathy holds a B.Sc. in Chemistry from Assiut University, a Master’s in Analytical Chemistry from Benha University, and a Ph.D. in Chemistry from Ain Shams University. His research interests focus on water treatment, environmental chemistry, and analytical techniques. Dr. Fathy has published extensively and led projects funded by the Science and Technology Development Fund. Committed to continuous learning, he remains at the forefront of scientific research and innovation, contributing significantly to the field of chemistry and environmental science in Egypt.

Professional Profiles:

Education

Assoc. Prof. Dr. Fathy Mohamed obtained his Bachelor of Science in Chemistry from Assiut University, Faculty of Science, Assuit, Egypt, in May 1994. He pursued further education and earned a Master of Analytical Chemistry from Benha University, Faculty of Science, Benha, Egypt, in January 2006. Later, he completed his PhD in Chemistry from Ain Shams University, Faculty of Science, Abbasia, Egypt, in October 2009.

Professional Experience

Dr. Fathy Mohamed has amassed over 25 years of professional experience, primarily in the field of chemistry and water management. Commencing his career as a Chemist in Quality Control and Production at a private company from 1994 to 1999, he subsequently served as the Technical Manager of the Research and Development (R&D) section at Kaha Company for Chemical Industries until 2009. His responsibilities encompassed the design of various treatment units, monitoring drinking and wastewater, and the preparation of chemicals for water treatment. Transitioning to roles of increasing responsibility, he assumed the position of Quality Sector Head at Qena Company for Water and Wastewater from 2010 to 2012. Dr. Fathy also ventured into academia, serving as a Lecturer of Chemistry at Al-Asmarya Islamic University in Libya from 2012 to 2013. His expertise led him to become the General Manager of R&D and Desalination Management at Matrouh Company for Water and Wastewater from 2014 to 2017. Since October 2017, he has been actively involved in academia as a Lecturer of Water and Wastewater Treatment at the Faculty of Earth Sciences, where he imparts knowledge on water treatment processes. Dr. Fathy’s remarkable career trajectory culminated in his appointment as the Manager of the IT Unit and Associate Professor of Physical Chemistry, concurrently serving as the Head of the Water and Environment Department at the Faculty of Earth Sciences from July 2020 onwards. Throughout his professional journey, Dr. Fathy has made significant contributions to advancing water treatment methodologies and has been actively engaged in academic and research endeavors in the field of water management.

Research Interest

Dr. Fathy Mohamed’s research interests lie at the intersection of chemistry, water management, and environmental science. He is particularly interested in exploring innovative approaches to water treatment and purification, with a focus on addressing challenges related to drinking, sewage, and industrial wastewater. His research endeavors aim to enhance the efficiency and sustainability of water treatment processes while mitigating environmental impacts. Dr. Fathy is also interested in the assessment and mapping of natural hazards associated with water resources, such as floods, runoff erosion, and coastal erosion. Through his research, he seeks to develop strategies for the sustainable management of water resources and the protection of environmental quality. Additionally, Dr. Fathy’s research interests extend to the development of novel materials and technologies for water purification, as well as the investigation of water chemistry and its implications for environmental health.

Award and Honors

Dr. Fathy Mohamed has garnered recognition and accolades for his outstanding contributions to the fields of chemistry and environmental science. Notably, his research efforts have been acknowledged through the publication of numerous papers in esteemed international conferences and journals, showcasing his significant findings and advancements in water treatment and environmental chemistry. As a Principal Investigator (PI) for projects funded by the Science and Technology Development Fund (STDF), Dr. Fathy has demonstrated exemplary leadership and expertise in addressing complex water-related challenges. Moreover, his active participation in international conferences and workshops underscores his esteemed standing as a respected expert in the field. Dr. Fathy has also received fellowships and undergone specialized training programs, further enhancing his capabilities and enabling him to make meaningful contributions to scientific research and innovation. Overall, Dr. Fathy Mohamed’s awards and honors underscore his commitment to advancing knowledge and finding sustainable solutions to pressing environmental issues.

Research Skills

Dr. Fathy Mohamed possesses a diverse set of research skills honed over years of academic and professional experience. His expertise encompasses various areas of chemistry and environmental science, particularly focusing on water treatment and analytical techniques. With a solid foundation in laboratory methodologies and fieldwork, Dr. Fathy is adept at conducting complex experiments, analyzing data, and interpreting results. His proficiency extends to statistical analysis, allowing for rigorous assessment and validation of research findings. Moreover, Dr. Fathy demonstrates proficiency in literature review and synthesis, enabling him to stay abreast of the latest developments in his field and integrate existing knowledge into his research endeavors. His strong communication skills facilitate collaboration with peers and stakeholders, fostering interdisciplinary approaches to addressing environmental challenges. Dr. Fathy’s research skills are complemented by his commitment to continuous learning and professional development, ensuring that he remains at the forefront of scientific inquiry and innovation.

Publications

Novel method of poly aluminum chloride extraction from kaolin and its application for wastewater treatment
- Authors: Mohamed, F.M.; El-Aassar, M.R.; Abdullah, A.M.; Abd El-Gaied, I.M.; Mohamed, E.A.
- Year: 2024
Effective Removal of Carcinogenic Azo Dye from Water Using Zea mays-Derived Mesoporous Activated Carbon
- Authors: Mohamed, F.M.; El-Aassar, M.R.; Ibrahim, O.M.; Abdel Rafea, M.; Omran, K.A.
- Year: 2023
Fabrication of Novel Bentonite-Anthracite@Zetag (BT-An@Zetag) Composite for the Removal of Arsenic (V) from an Aqueous Solution
- Authors: El-Aassar, M.R.; Alezbaway, A.K.; Althobaiti, I.O.; Mohy-Eldin, M.S.; Mohamed, F.M.
- Year: 2022
Fabrication of Polyaniline@β-cyclodextrin Nanocomposite for Adsorption of Carcinogenic Phenol from Wastewater
- Authors: El-Aassar, M.R.; Ibrahim, O.M.; Hashem, F.S.; Elzain, A.A.; Mohamed, F.M.
- Year: 2022
Reduction of non-point source pollution by poly(styrene-co-acrylonitrile) composites nanofibers inoculated with sorbent materials
- Authors: El-Aassar, M.R.; Hashem, F.S.; Elzain, A.A.; Ali, A.S.M.; Mohamed, F.M.
- Year: 2021
Fabrication of novel valorized ecofriendly olive seed residue/anthracite/chitosan composite for removal of Cr (VI): kinetics, isotherms and thermodynamics modeling
- Authors: El-Aassar, M.R.; Mohamed, F.M.; Alsohaimi, I.H.; Khalifa, R.E.
- Year: 2021
Reusing and characterization of the used reverse osmosis membrane and its application in surface water purification
- Authors: El-Aassar, M.R.; Elzain, A.A.; Hashem, F.S.; Mohamed, F.M.
- Year: 2021
Characterization valorized anthracite and its application in manganese (VII) adsorption from aqueous solution; batch and column studies
- Authors: El-Aassar, M.R.; Mohamed, F.M.
- Year: 2021
Integrated system of post-treatment for desalinated water using low cost egyptian natural materials – a case study
- Authors: Mohamed, F.M.
- Year: 2020
Carbon nanotube impregnated anthracite (An/CNT) as a superior sorbent for azo dye removal
- Authors: Mohamed, F.M.; Li, Z.; Zayed, A.M.
- Year: 2020

Dr. Asma Bouzeriba | Sustainability Award | Best Researcher Award

Doctor at University of Tissemsilt, Algeria.

Asma Bouzeriba is a highly skilled professional in the field of civil engineering, with a strong background in structural analysis and materials science. She holds a Ph.D. in Civil Engineering, specializing in materials and structures, from the University of Bejaïa. Asma has extensive experience as an educator, having served as a lecturer at the Centre Universitaire de Tissemsilt, Institut des Sciences et des Technologies. Her research interests include finite element modeling, functionally graded materials, and structural behavior under various loading conditions. Asma is also proficient in project management and has a keen interest in research and teaching. Her diverse skill set and expertise make her a valuable asset in the field of civil engineering.

Professional Profiles:

Education:

Bouzeriba Asma earned her Ph.D. in Civil Engineering with a specialization in materials and structures from the University of Bejaïa, completing the program in May 2016. Prior to her doctoral studies, she obtained a Master’s degree in Civil Engineering, focusing on structures, from the University of Jijel in June 2010. Her academic journey began with a Bachelor’s degree in Civil Engineering from the University of Jijel in June 2008. She completed her Baccalauréat in Science de la Nature et de la Vie at Jijel in June 2005.

Experience:

Asma Bouzeriba has experience as an educator and researcher. She served as a lecturer at the Centre Universitaire de Tissemsilt, Institut des Sciences et des Technologies, starting in April 2017. In this role, she likely taught courses related to civil engineering, materials, and structures. Additionally, she has supervised student research projects, including studies on seismic design and analysis of buildings. Asma Bouzeriba’s expertise in finite element analysis and her research on the behavior of cylinders under pressure and temperature demonstrate her strong background in structural engineering.

Research Interest:

Asma Bouzeriba’s research interests focus on structural engineering, particularly in the areas of finite element modeling and analysis. Her work includes the study of cylinders under various loading conditions, such as pressure and temperature, using advanced numerical methods. She is also interested in functionally graded materials (FGMs) and their application in structural components. Asma’s research contributes to the understanding of complex structural behaviors and has implications for the design and analysis of engineering structures subjected to harsh environmental conditions.

Skills:

Asma Bouzeriba is a highly skilled professional with expertise in civil engineering and structural analysis. Her proficiency in finite element analysis (FEA) allows her to model and analyze complex structural systems effectively. With a strong background in structural engineering principles and practices, she demonstrates a deep understanding of materials science and its application in structural design. Asma is also experienced in conducting research, writing scientific papers, and presenting findings at conferences. Her teaching skills are evident in her ability to effectively communicate complex engineering concepts to students. Additionally, Asma is adept at project management, having successfully managed research projects and student research work. Her proficiency in software tools relevant to civil engineering and structural analysis further enhances her capabilities in the field. Overall, Asma’s diverse skill set and expertise make her a valuable asset in civil engineering research, teaching, and practical applications.

Publications:

Sector element for analysis of thick cylinders exposed to internal pressure and change of temperature
- Authors: A. Bouzriba, C. Bouzrira
- Year: 2015
- Journal: Gradevinar, Volume 67, Issue 6, Pages 547-555
A sector in-plane finite element for analysis of multi-layer cylinders exposed to pressure and thermal loading
- Authors: A. Bouzeriba, C. Bouzrira
- Year: 2022
- Journal: Engineering Review, Volume 1
Strain based finite element for the analysis of heterogeneous hollow cylinders subjected to thermo-mechanical loading
- Authors: A. Bouzeriba, C. Bouzrira
- Year: 2022
- Journal: Structural Engineering and Mechanics, Volume 83, Issue 6, Page 825
The analysis of pressurized FGM cylinders with arbitrarily varying material properties using strain based approach
- Authors: A. Bouzeriba, C. Bouzrira
- Year: 2024
- Journal: Mechanics Based Design of Structures and Machines, Pages 1-19
Sektorski element za analizu debelih cijevi izloženih autarnjem tlaku a promjeni temperature
- Authors: A. Bouzriba, C. Bouzrira
- Year: 2015
- Journal: Građevinar, Volume 67, Issue 06, Pages 547-555
Sektorski element za analizu debelih cijevi izloženih autarnjem tlaku a promjeni temperature
- Authors: SB u Alžiru, SJ u Alžiru, A. Bouzriba, C. Bouzrira
- Year: (year not provided)

Fathy Mohamed | Waste Water Treatment | Best Researcher Award